Compare CNC Machining Materials


*The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications for quality control.

search close

Material

expand_less expand_more

Attributes

expand_less expand_more
Reset Filters
Expand Allexpand_all
Collapse Allcollapse_all
AND
CNC Material
ABS Black
Strength
Cost Effective
Stiffness
More Detailsexpand_circle_down Less Detailsexpand_circle_up
ABS is a low-cost engineering plastic that is easy to machine. ABS is an ideal material for structural applications when impact resistance, strength, and stiffness are required. It’s widely used for pre-production prototypes since it has excellent dimensional stability and is easy to paint and glue.
Tensile Strength
37 MPa
Impact Strength
333 kJ/m²
Heat Deflection
100 °C
Max. Part Size:
(5-axis-indexed) 254 mm x 178 mm x 93 mm (3-axis 2-sided) 279 mm x 228 mm x 93 mm
View Data Sheet
CNC Material
ABS Natural
Strength
Cost Effective
Stiffness
More Detailsexpand_circle_down Less Detailsexpand_circle_up
ABS is a low-cost engineering plastic that is easy to machine. ABS is an ideal material for structural applications when impact resistance, strength, and stiffness are required. It’s widely used for pre-production prototypes since it has excellent dimensional stability and is easy to paint and glue.
Tensile Strength
37 MPa
Impact Strength
333 kJ/m²
Heat Deflection
100 °C
Max. Part Size:
(5-axis-indexed) 254 mm x 178 mm x 93 mm (3-axis 2-sided) 356 mm x 254 mm x 44 mm
View Data Sheet
CNC Material
HDPE Black
Strength
Lightweight
Chemical Resistance
More Detailsexpand_circle_down Less Detailsexpand_circle_up
HDPE is a high-density polyethylene that is lightweight, has low moisture absorption, is chemical and corrosion resistant, and has high strength. It is great for applications such as orthotic and prosthetic devices, water storage, and tanks.
Tensile Strength
23 MPa
Impact Strength
no break
Heat Deflection
85 °C
Max. Part Size:
(5-axis-indexed) 254 mm x 178 mm x 93 mm (3-axis 2-sided) 278 mm x 228 mm x 93 mm
View Data Sheet
CNC Material
HDPE Natural
Strength
Lightweight
Chemical Resistance
More Detailsexpand_circle_down Less Detailsexpand_circle_up
HDPE is a high-density polyethylene that is lightweight, has low moisture absorption, is chemical and corrosion resistant, and has high strength. It is great for applications such as orthotic and prosthetic devices, water storage, and tanks.
Tensile Strength
23 MPa
Impact Strength
no break
Heat Deflection
85 °C
Max. Part Size:
(5-axis-indexed) 254 mm x 178 mm x 93 mm (3-axis 2-sided) 278 mm x 228 mm x 93 mm
View Data Sheet
CNC Material
Nylon PA 6 Black
Strength
Wear Resistance
High Toughness
More Detailsexpand_circle_down Less Detailsexpand_circle_up
Nylon offers extremely good wear resistance, high tensile strength, and high modulus of elasticity, making it a great option in applications such as bearings, gears, and sprockets.
Tensile Strength
82 MPa
Impact Strength
no break
Heat Deflection
95 °C
Max. Part Size:
(5-axis-indexed) 254 mm x 178 mm x 93 mm (3-axis 2 sided) 279 mm x 228 mm x 93 mm
View Data Sheet
CNC Material
Nylon PA 6 Natural
Strength
Wear Resistance
High Toughness
More Detailsexpand_circle_down Less Detailsexpand_circle_up
Nylon offers extremely good wear resistance, high tensile strength, and high modulus of elasticity, making it a great option in applications such as bearings, gears, and sprockets.
Tensile Strength
82 MPa
Impact Strength
no break
Heat Deflection
95 °C
Max. Part Size:
(5-axis-indexed) 254 mm x 178 mm x 93 mm (3-axis 2 sided) 279 mm x 228 mm x 44 mm
View Data Sheet
CNC Material
Nylon PA 6 (30% glass-filled) Black
Strength
UV Resistance
Abrasion Resistance
More Detailsexpand_circle_down Less Detailsexpand_circle_up
This 30% glass-fibre reinforced Nylon offers extremely good wear resistance, high tensile strength, and high modulus of elasticity, making it a great option in applications such as bearings, gears, and sprockets.
Tensile Strength
110 MPa
Impact Strength
50 kJ/m²
Heat Deflection
95 °C
Max. Part Size:
254 mm x 178 mm x 44 mm
View Data Sheet
CNC Material
Nylon PA6 V-0 Natural
Flame Resistance
High Mechanical Rigidity
More Detailsexpand_circle_down Less Detailsexpand_circle_up
Nylon 6 Flame Retardant offers flame resistance, high tensile strength, and high modulus of elasticity, making it a great option in applications such as railway vehicle construction and the aviation industry.
Tensile Strength
82 MPa
Impact Strength
no break
Heat Deflection
65 °C
Max. Part Size:
254 mm x 178 mm x 44 mm
View Data Sheet
CNC Material
Nylon PA 66 Natural
Lightweight
Fatigue Resistance
Noise Dampening
More Detailsexpand_circle_down Less Detailsexpand_circle_up
Nylon offers extremely good wear resistance and low frictional properties. It has very good temperature, chemical, and impact properties. Max part size for 3 axis, 2-sided milling: 279 mm x 228 mm x 93 mm
Tensile Strength
85 MPa
Impact Strength
no break
Heat Deflection
95 °C
Max. Part Size:
254 mm x 178 mm x 93 mm
View Data Sheet
CNC Material
Nylon PA 66 (30% glass-filled) Black
Strength
Stiffness
Heat Resistance
More Detailsexpand_circle_down Less Detailsexpand_circle_up
This 30% glass-fibre reinforced Nylon is important qualities such as high tensile and flexural strength, stiffness, and excellent heat deflection. Glass-fiber offers more than double the strength and stiffness of unreinforced nylons.
Tensile Strength
90 MPa
Impact Strength
50 kJ/m²
Heat Deflection
150 °C
Max. Part Size:
254mm x 178mm x 93mm
View Data Sheet
PBT GF Material
PBT (30% glass-filled) Light Grey
Dimensional Stability
Strength
Stiffness
More Detailsexpand_circle_down Less Detailsexpand_circle_up
This 30% glass-fibre reinforced Polybutylene terephthalate is an engineering thermoplastic used in applications within mechanical engineering, electrical engineering and the automotive industry.
Tensile Strength
46 MPa
Impact Strength
37 kJ/m²
Heat Deflection
100 °C
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 70 mm (3 axis 2-sided) 279 mm x 228 mm x 74 mm
View Data Sheet
CNC Material
PC (Polycarbonate) Translucent
Electrical Insulation
Stiffness
Lower Moisture Absorption
More Detailsexpand_circle_down Less Detailsexpand_circle_up
Polycarbonate is an engineering plastic that offers excellent dimensional stability over a wide range of service temperatures. It is commonly used for structural applications when clarity and impact strength are essential. It can also be used in a wide range of electrical applications since it has a low moisture absorption, good insulating properties.
Tensile Strength
65 MPa
Impact Strength
no break
Heat Deflection
130 °C
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 93 mm (3-axis 2-sided) 279 mm x 228 mm x 73 mm
View Data Sheet
CNC Material
PEEK Natural
Chemical Resistance
Heat Resistance
More Detailsexpand_circle_down Less Detailsexpand_circle_up
PEEK is a unique semi-crystalline, high temperature engineering thermoplastic. Its material properties provide a wide range of applications where thermal, chemical, and combustion are critical to performance. PEEK can retain flexural and tensile properties at very high temperatures. UL Flammability rating V-0 FDA Approved
Tensile Strength
100 MPa
Impact Strength
no break
Heat Deflection
152 °C
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 44 mm (3-axis 2-sided) 279 mm x 228 mm x 44 mm
View Data Sheet
CNC Material
rPEEK 25%
High Resistance to High Temperatures, Radiation, Chemicals, Hydrolysis and Moisture
Minimal Thermal Expansion
Low Outgassing Rates in a Vacuum
More Detailsexpand_circle_down Less Detailsexpand_circle_up
This grade of Polyetheretherketone PEEK is an unfilled, general purpose grade that offers the highest elongation and toughness of all materials in the PEEK family. It comes in a natural light brown colour and in two versions: • PEEK FDA (only raw material) • rPEEK 25% recycled content
Tensile Strength
115 MPa
Impact Strength
no break
Heat Deflection
160 °C
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 44 mm
View Data Sheet
CNC Material
PEI ULTEM 1000 Translucent Amber
Strength
Stress Resistance
Heat Resistance
More Detailsexpand_circle_down Less Detailsexpand_circle_up
ULTEM is an amorphous thermoplastic polyetherimide (PEI) material that combines exceptional mechanical, thermal, and electrical properties. Natural ULTEM is a translucent amber colour. Key attributes include excellent mechanical strength, ability to retain strength at elevated temperatures, high heat resistance, and high stress resistance. UL Flammability rating V-0
Tensile Strength
110 MPa
Impact Strength
no break
Heat Deflection
200 °C
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 44 mm (3-axis 2-sided) 279 mm x 228 mm x 44 mm
View Data Sheet
CNC Material
PEI ULTEM 2300 (30% glass-filled) Natural (Amber)
Strength
Stress Resistance
Temperature Resistance
More Detailsexpand_circle_down Less Detailsexpand_circle_up
ULTEM is an amorphous thermoplastic polyetherimide (PEI) material that combines exceptional mechanical, thermal, and electrical properties. The addition of glass fiber reinforcement provides the material with greater tensile strength and rigidity while improving dimensional stability. UL Flammability rating V-0
Tensile Strength
165 MPa
Impact Strength
40 kJ/m²
Heat Deflection
215 °C
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 44 mm (3-axis 2-sided) 279 mm x 228 mm x 44 mm
View Data Sheet
CNC Material
PET White
Strength
Wear Resistance
Chemical Resistance
More Detailsexpand_circle_down Less Detailsexpand_circle_up
PET, also known as Polyethylene Terephthalate, is a semi-crystalline thermoplastic polyester with excellent wear resistance, low coefficient of friction, high flexural modules, and superior dimensional stability. It it a very versatile option for mechanical and electro-mechanical parts.
Tensile Strength
85 MPa
Impact Strength
80 kJ/m²
Heat Deflection
80 °C
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 93 mm (3-axis 2-sided) 279 mm x 228 mm x 93 mm
View Data Sheet
CNC Material
PE-UHMW Natural
Impact Resistance
Corrosion Resistance
Low Moisture Absorption
More Detailsexpand_circle_down Less Detailsexpand_circle_up
Ultra High Molecular Weight Polyethylene provides a unique combination of wear and corrosion resistance, low friction surface, and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties in cold temperatures. It is also a cost-effective solution for food handling applications as it meets FDA and USDA guidelines.
Tensile Strength
19 MPa
Impact Strength
no break
Heat Deflection
82 °C
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 93 mm (3-axis 2-sided) 279 mm x 228 mm x 93 mm
View Data Sheet
CNC Material
PMMA (Acrylic) Translucent
Transparent
UV Resistance
More Detailsexpand_circle_down Less Detailsexpand_circle_up
Polymethyl methacrylate is a hard material sometimes referred to as Plexiglas™ and acrylic. It is often used as a lighter, shatter-resistant alternative to glass for its transparent appearance.
Tensile Strength
60 MPa
Impact Strength
18 kJ/m²
Heat Deflection
80 °C
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 93 mm (3-axis 2-sided) 279 mm x 228 mm x 74 mm
View Data Sheet
CNC Material
POM-C (Acetal Copolymer) Black
Chemical Resistance
Dimensional Stability
Low Friction
More Detailsexpand_circle_down Less Detailsexpand_circle_up
Acetal is an engineering thermoplastic used in precision parts requiring high stiffness, low friction, and excellent dimensional stability.
Tensile Strength
66 MPa
Impact Strength
no break
Heat Deflection
100 °C
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 93 mm (3-axis 2-indexed) 380 mm x 279 mm x 70 mm
View Data Sheet
CNC Material
POM-C (Acetal Copolymer) Natural
Chemical Resistance
Dimensional Stability
Low Friction
More Detailsexpand_circle_down Less Detailsexpand_circle_up
Acetal is an engineering thermoplastic used in precision parts requiring high stiffness, low friction, and excellent dimensional stability.
Tensile Strength
66 MPa
Impact Strength
no break
Heat Deflection
100 °C
Max. Part Size:
(5-axis) 254 mm x 178 mm x 93 mm (3-axis 2-sided) 279 mm x 228 mm x 93 mm
View Data Sheet
CNC Material
POM-C (Acetal Copolymer) FDA Approved Blue
Chemical Resistance
Dimensional Stability
Low Friction
More Detailsexpand_circle_down Less Detailsexpand_circle_up
Acetal is an engineering thermoplastic used in precision parts requiring high stiffness, low friction, and excellent dimensional stability.
Tensile Strength
66 MPa
Impact Strength
no break
Heat Deflection
100 °C
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 93 mm (3-axis 2-sided) 279 mm x 228 mm x 44 mm
View Data Sheet
CNC Material
rPOM-C 100%
High Mechanical Strength and Rigidity
High Resistance to Wear, Hydrocarbons, Water and Solvents
More Detailsexpand_circle_down Less Detailsexpand_circle_up
Acetal is an engineering thermoplastic used in precision parts requiring high stiffness, low friction, and excellent dimensional stability. This type of POM is a general purpose copolymer with high mechanical strength and rigidity. It comes with excellent machinability capabilities, good sliding characteristics and excellent wear resistance, as well as low moisture absorption. It comes in black colour and in two versions: • POM-C FDA (only raw material) • rPOM-C 100% recycled content
Tensile Strength
66 MPa
Impact Strength
no break
Heat Deflection
100 °C
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 93 mm
View Data Sheet
CNC Material
POM-H (Acetal Homopolymer) Black
Strength
Creep Resistance
Stiffness
More Detailsexpand_circle_down Less Detailsexpand_circle_up
Acetal Homopolymer is an engineering thermoplastic offering high mechanical strength, stiffness, hardness, and creep resistance. It often provides better wear resistance than Acetal Copolymer.
Tensile Strength
78 MPa
Impact Strength
no break
Heat Deflection
110 °C
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 32 mm (3-axis 2-indexed) 279 mmx 228 mm x 44 mm
View Data Sheet
CNC Material
POM-H (Acetal Homopolymer) Natural
Strength
Creep Resistance
Stiffness
More Detailsexpand_circle_down Less Detailsexpand_circle_up
Acetal Homopolymer is an engineering thermoplastic offering high mechanical strength, stiffness, hardness, and creep resistance. It often provides better wear resistance than Acetal Copolymer.
Tensile Strength
78 MPa
Impact Strength
no break
Heat Deflection
110 °C
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 32 mm (3-axis 2-indexed) 279 mmx 228 mm x 44 mm
View Data Sheet
CNC Material
POM-C ESD (Acetal Static Dissipative) Natural
Antistatic
Moisture Resistance
Wear Resistance
More Detailsexpand_circle_down Less Detailsexpand_circle_up
Acetal Static Dissipative is a semicrystalline engineering plastic with permanent antistatic additives for varied applications in electronics.
Tensile Strength
45 MPa
Impact Strength
no break
Heat Deflection
88 °C
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 44 mm (3-axis 2-indexed) 279 mm x 228 mm x 44 mm
View Data Sheet
CNC Material
PP Homopolymer Natural
Corrosion Resistance
Chemical Resistance
Moisture Resistance
More Detailsexpand_circle_down Less Detailsexpand_circle_up
Polypropylene (PP) Homopolymer is a crystalline material with a high strength-to-weight ratio, excellent chemical resistance, and high performance in thermoforming and corrosive environments.
Tensile Strength
32 MPa
Impact Strength
no break
Heat Deflection
54 °C
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 70 mm (3-axis 2-sided) 279 mm x 228 mm x 74 mm
View Data Sheet
CNC Material
PPSU (Radel R 5500) Black
Flame Resistance
Heat Resistance
More Detailsexpand_circle_down Less Detailsexpand_circle_up
RADEL R polyphenylsulfone resins offer exceptional hydrolytic stability and toughness that is superior to other commercially available, high-temperature engineering resins. It offers high deflection temperature and outstanding resistance to environmental stress cracking. The polymer is inherently flame retardant, has excellent thermal stability, and good electrical properties.
Tensile Strength
69 MPa
Impact Strength
694 J/m
Heat Deflection
215 °C
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 44 mm (3-axis 2-sided) 279 mm x 228 mm x 44 mm
View Data Sheet
CNC Material
PTFE (Teflon) White
Heat Resistance
High Density
Chemical Resistance
More Detailsexpand_circle_down Less Detailsexpand_circle_up
PTFE is a crystalline polymer commonly known by its trade name, Teflon. Properties include very high melting point and exceptional resistance to chemicals. Being hydrophobic, non-wetting, non-stick, high density, and resistant to high temperatures, it is incredibly versatile.
Tensile Strength
22 MPa
Impact Strength
no break
Heat Deflection
118 °C
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 44 mm (3-axis 2-sided) 279 mm x 228 mm x 44 mm
View Data Sheet
CNC Material
PVC Dark Grey
Corrosion Resistance
Cost Effective
Machinability
More Detailsexpand_circle_down Less Detailsexpand_circle_up
Polyvinyl Chloride (PVC) is an extremely versatile polymer and used widely across many industries due to its exceptional corrosion resistance, high strength-to-weight ratio, and cost efficiency.
Tensile Strength
55 MPa
Impact Strength
no break
Heat Deflection
72°C
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 93 mm (3-axis 2-sided) 279 mm x 228 mm x 93 mm
View Data Sheet
CNC Material
Aluminium 2024-T351
Corrosion Resistance
Thread Rolling
Strength
More Detailsexpand_circle_down Less Detailsexpand_circle_up
Aluminium 2024 is heavily utilised in aircraft applications because it has good machining characteristics and higher strength than other aluminiums. Its machinable properties are strong, making it essential for precision fittings and parts.
Tensile Strength
469 MPa
Elongation
19%
Hardness
120 HB
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 70 mm (3-axis 2-sided) 356 mm x 254 mm x 44 mm / 559 mm x 356 mm x 32 mm (Bar Size) Ø 75 mm x 228 mm (Z)
View Data Sheet
CNC Material
Aluminium 5083-H111
Seawater Resistance
Weldability
More Detailsexpand_circle_down Less Detailsexpand_circle_up
Aluminium 5083 is known for exceptional performance in extreme environments. 5083 is highly resistant to attack by both seawater and industrial chemical environments. Alloy 5083 also retains exceptional strength after welding. It has the highest strength of the non-heat treatable alloys.
Tensile Strength
300 MPa
Elongation
12%
Hardness
75 HB
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 93 mm (3-axis 2-sided) 559 mm x 356 mm x 44 mm (Bar Size) Ø 75 mm x 228 mm (Z)
View Data Sheet
CNC Material
Aluminium 6082-T651/T6
Corrosion Resistance
Machinability
Weldability
More Detailsexpand_circle_down Less Detailsexpand_circle_up
Aluminium 6082 is a versatile and widely used for structural applications, including rod, bar, tube and profiles. The "T6" and "T651" designations refer to specific tempering processes that enhance its strength and stress relief capabilities. Aluminium 6082 is a very commonly alloy used in Europe and is gaining popularity in the US for rod and bar machining stock, seamless tubing, structural profiles and custom profiles.
Tensile Strength
280 MPa
Elongation
7%
Hardness
95 HB
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 93 mm (3-axis 2-sided) 559 mm x 356 mm x 93 mm (Bar Size) Ø 75 mm x 228 mm (Z)
View Data Sheet
CNC Material
Aluminium 7075-T651/T6
Corrosion Resistance
Toughness
Ductility
More Detailsexpand_circle_down Less Detailsexpand_circle_up
Aluminium 7075 is an alloy with zinc as the primary alloying element. It has excellent mechanical properties and exhibits high strength, toughness, and resistance to fatigue. It has higher corrosion resistance than other aluminium's, making it a great option for aerospace applications.
Tensile Strength
500 MPa
Elongation
6%
Hardness
150 HB
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 91 mm (3-axis 2-sided) 559 mm x 356 mm x 91 mm (Bar Size) Ø 75 mm x 228 mm (Z)
View Data Sheet
CNC Material
Aluminium 7075-T7351
Corrosion Resistance
Toughness
Ductility
More Detailsexpand_circle_down Less Detailsexpand_circle_up
Aluminium 7075 is an alloy with zinc as the primary alloying element. It has excellent mechanical properties and exhibits high strength, toughness, and resistance to fatigue. It has higher corrosion resistance than other aluminiums, making it a great option for aerospace applications.
Tensile Strength
470 MPa
Elongation
7%
Hardness
135 HB
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 91 mm (3-axis 2-sided) 559 mm x 356 mm x 91 mm
View Data Sheet
CNC Material
Brass Cz121/C360
Corrosion Resistance
Machinability
More Detailsexpand_circle_down Less Detailsexpand_circle_up
Brass is an alloy consisting of both copper and zinc. The gold material is a weather and corrosion resistant metal with tensile strength similar to mild steel. It is also an easy to machine material, so feed rates can remain high and coolant need is minimal. Brass C360 remains the industry standard for general machining and high-volume production.
Tensile Strength
400 MPa
Elongation
12%
Hardness
125 HB
Max. Part Size:
(Bar Size) Ø 75 mm x 228 mm
View Data Sheet
CNC Material
Brass Cz112/C464
Corrosion Resistance
Strength
Retention of Properties at Cryogenic Temperatures
More Detailsexpand_circle_down Less Detailsexpand_circle_up
Cz112 also known as naval brass is an alloy consisting of both copper and tin. The gold material is weather and corrosion resistant with tensile strength like mild steel. It is also an easy to machine material, so feed rates can remain high and coolant need is minimal. Brass CZ112, contains between 59.5 and 63.5 percent copper, and 1.0 and 1.5 per cent tin. The increase in corrosion resistance enables the material to be used in both seawater and other mildly aggressive media. It also offers better strength levels than many of the basic alpha brasses.
Tensile Strength
370 MPa
Elongation
22%
Hardness
110 HB
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 93 mm (3-axis 2-sided) 279 mm x 228 mm x 93 mm
View Data Sheet
Carbon steel material
Carbon Steel EN8/C45
Ductility
Machinability
More Detailsexpand_circle_down Less Detailsexpand_circle_up
EN8 is an unalloyed medium carbon steel grade with reasonable tensile strength. EN8 is widely used in applications, which require better properties that mild steel but does not justify the costs of an alloy steel. Common applications include shafts, studs, bolts, connecting rods, screws, rollers.
Tensile Strength
650 MPa
Elongation
16%
Hardness
225 HB
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 44 mm (3-axis 2-sided) 279 mm x 228 mm x 44 mm (Bar Size) Ø 75 mm x 228 mm (Z)
View Data Sheet
CNC Material
Copper C101
Corrosion Resistance
High Conductivity
Ductility
More Detailsexpand_circle_down Less Detailsexpand_circle_up
Copper C101 is also known as HC or high conductivity copper. It has a nominal conductivity of 100% and has high thermal conductivity making it a popular choice for all types of electrical components and conductors. It also offers high ductility and impact strength, making it a versatile and useful material.
Tensile Strength
283 MPa
Elongation
14%
Hardness
40 HRB
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 44 mm (3-axis 2-sided) 279 mm x 228 mm 44 mm
View Data Sheet
Mild steel s275
Mild Steel S275JR
Machinability
Weldability
More Detailsexpand_circle_down Less Detailsexpand_circle_up
S275 is an unalloyed low carbon mild steel grade supplied as hot rolled. S275 provides low strength with good machinability and is suitable for welding. Commonly used in construction, maintenance and manufacturing industries.
Tensile Strength
380-540 MPa
Elongation
15%
Hardness
140 HV
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 44 mm (3-axis 2-sided) 279 mm x 228 mm x 44 mm (Bar Size) Ø 75 mm x 228 mm (Z)
View Data Sheet
CNC Material
Stainless Steel 17-4 PH
Corrosion Resistance
Strength
Ductility
More Detailsexpand_circle_down Less Detailsexpand_circle_up
Stainless steel is well suited for a wide range of applications due to its excellent machinability and outstanding uniformity. It has good workability and weldability. This metal has very high tensile strength, and has high resistance to corrosion and wear.
Tensile Strength
1200 MPa
Elongation
8%
Hardness
360 HB
Max. Part Size:
(5-axis indexed) 178 mm x 178 mm x 44 mm (3-axis 2-sided) 178 mm x 178 mm x 44 mm (Bar Size) Ø 75 mm x 228 mm (Z)
View Data Sheet
CNC Material
Stainless Steel 304L
Corrosion Resistance
Machinability
Ductility
More Detailsexpand_circle_down Less Detailsexpand_circle_up
Stainless 304L is the most common stainless steel. The steel contains both chromium and nickel metals as the main non-iron constituents. It has good resistance to oxidation, corrosion, and provides superior part surface quality.
Tensile Strength
600 MPa
Elongation
40%
Hardness
85 HRB
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 44 mm (3-axis 2-sided) 279 mm x 228 mm x 44 mm (Bar Size) Ø 75 mm x 228 mm (Z)
View Data Sheet
CNC Material
Stainless Steel 316L
Corrosion Resistance
Machinability
Cost Effective
More Detailsexpand_circle_down Less Detailsexpand_circle_up
Stainless steel 316L offers good machinability and outstanding uniformity. This material offers faster machining speeds, longer tool life, and improved part quality at a lower total cost.
Tensile Strength
586 MPa
Elongation
56%
Hardness
81 HRB
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 44 mm (3-axis 2-sided) 279 mm x 228 mm x 44mm (Bar Size) Ø 75 mm x 228 mm (Z)
View Data Sheet
CNC Material
Titanium Grade 5
Corrosion Resistance
Strength
Heat Resistance
More Detailsexpand_circle_down Less Detailsexpand_circle_up
Titanium is extremely strong and boasts a high strength-to-weight ratio. It also has excellent corrosion resistance, high operating temperatures (up to 537°C) and is nontoxic. Another key is its low thermal expansion and high melting point that is roughly 1,648° C. Machining titanium will be more costly than other metals such as aluminium.
Tensile Strength
893 MPa
Elongation
10%
Hardness
36 HRC
Max. Part Size:
(5-axis indexed) 254 mm x 178 mm x 44 mm (3-axis 2-sided) 279 mm x 228 mm x 44 mm (Bar Size) Ø 75 mm x 228 mm (Z)
View Data Sheet
There are no materials that match the selected combination of filters.